Mirari PowerPC Motherboard: 100-Board Production Run Delayed

The Mirari PowerPC motherboard is heading for its biggest production run yet, and according to a headline on The Oasis BBS, that run of 100 new boards has now been held up by a production delay. Here is some background on what Mirari is and why those 100 boards matter.

What is Mirari?

Mirari started life in 2024 as a KiCad motherboard design. Since then the developers have worked through the problems you would expect from completely new hardware: clock issues, PCI Express fixes, firmware work, driver development and plenty of testing. The result is a PowerPC system that is much closer to a complete desktop platform than an engineering board that happens to boot.

From five prototypes to 100 boards

The first production batch was just five boards, built to answer basic questions: does the hardware start, does the firmware initialise everything, will Linux boot, and do PCI Express, storage and networking work? An early oscillator problem stopped several important clock signals from behaving, but once it was fixed, U-Boot and Linux came up quickly.

The Proto 2 run is on a different scale. One hundred boards are being prepared, with processors sourced from the United States and assembly planned in the Netherlands. It will not turn Mirari into a mass-produced PC, but building, testing and shipping 100 consistent machines needs a much tighter production process than five engineering samples did.

Modern hardware around a PowerPC processor

  • NVMe storage, SATA, USB 3.0, Ethernet and PCI Express
  • Up to 8 GB of memory via DDR SO-DIMM modules
  • Several PowerPC Linux distributions already run from an NVMe drive connected directly to the board

Development has not been completely smooth. The PCIe x1 slot needed a hardware correction during testing, and an earlier Proto 2 batch arrived without some components fitted because the parts were not available, so items like the PCIe x16 connector and USB headers had to be added by hand. That is what prototype work looks like.

Software support

MorphOS 3.20 adds support for the Mirari architecture, including drivers for networking, storage and temperature control, and it can install to and boot from an NVMe SSD.

About the delay

The Oasis BBS reports that a production delay is holding up the 100 new motherboards. I have not been able to read that article in full, so I cannot say what caused the delay or how long it is expected to last. For the details, read the original report.

Sources